Other DK-LOK® Products

DK-LOK®’s staff is committed to providing you with unparalleled customer service. Through our quality products, customer service, and pricing we are able to create a true value for you, our client. DK-LOK® looks forward to creating a solution for whatever need you may have.

If you require any products not listing in our products listing or not listed below, please contact us at (800) 328-5803 and our customer service staff will assist you.

DK-LOK® ALTERNATIVE FUEL PRODUCTS

CNG/NGV Products Condensed Catalog Download Now
CNG Hoses  Download Now

• DK-LOK® CNG/NGV Ball Valves & Filters
• DK-LOK® CNG/NGV Check, Relief, Bleed & RCQ Valves
• DK-LOK® Instrumentation Pipe & Weld Fittings

DK-LOK® Clean Fittings Download Now

• Clean Weld Fittings
• Metal Gasket Face-Seal Fittings

V61 Series Vent Relief Valves Download Now

V61 Series Vent Relief Valves are designed to vent out the excess pressure from the line, automatically, to keep the required line pressure safely when the line pressure is exceeded over the limitation unusually. These valves can be used in the case that the working fluid is not harmful when vented out. The level of cracking pressure should be set by adjusting the force of the spring in the valve before this valve is installed in the system.

VD3 Series Diaphragm Valves Download Now

The diaphragm valve is used for shut-off, isolation in gas control systems, and analyzer sampling systems.The valve ensures positive and consistent shut-off with manual and offers a metal to metal seal to atmosphere for leak integrity with thin plate diaphragm.

Metering Valves Download Now

VM 1D, 3D, 6D Series

V13W Series Bellows Valves Download Now

V13W series bellows offers the most difficult fluid handling applications. This design, with the secondary sealing system, fits to the need for a safe and reliable system.

Applications include cryogenic to high temperatures, high pressure to vacuum in power plants, instrumentation, panels, and critical sampling system for toxic, radioactive, and hazardous fluids.

Push-On Hose Fittings Download Now

DK-LOK® Push-On Hose Fittings are designed for use with high-quality and low-pressure elastomeric compound hose such as textile braid reinforced synthetic rubber hose.

CP Series Hydraulic Condensate Pot Download Now

CP Series Hydraulic Condensate Pots are designed and configured in six layouts. Refer to POT Configuration.

DK-LOK® DO Series O-Ring Face Seal Fittings Download Now

• Female Nut Blind Nut
• Blind Nut
• Glands Swivel Union
• DK-LOK® Tube Fitting Connector
• Tube Adapter Gland
• Weld Tube Socket Weld Gland
• Tube Socket Weld Reducing Gland
• Male Tube Weld Gland
• Automatic Tube Weld Gland
• Glands Male Connector
• Female Connector
• Male SAE/MS Connector
• Bodies Union
• Bulkhead Union
• Reducing Union
• Elbow
• Tee
• Bodies Plugs
• DK-LOK® Tube Fitting Connector
• DK-LOK® Tube Fitting Bulkhead Connector
• DK-LOK® Tube Fitting Elbow
• Bodies Tube Socket Weld Connector
• Automatic Tube Weld Connector
• Male Connector
• Bodies Female Connector
• Male Elbow
• Male SAE/MS Connector
• Male SAE/MS Positionable Elbow

J Series Air Distribution Manifolds (Air Header) Download Now

J Series Air Distribution Manifolds are designed and configured in any layout to fit the application as per client’s requirements.

Metal Flexible Hoses Download Now

Using cleaned and passivated parts, the hoses and end connection are welded. Every hose assembly of MFH & FH Series is factory tested using nitrogen or cleaned air @ 1000 psig (68 bar) at the room temperature, and individually packed in a plastic sealing bag with an external label. The hydrostatic test of 1.1 times the working pressure or helium leak test is optional.

VC34 Series CNG Check Valves Download Now

• High Flow check valve.
• Bar stock two piece study design.
• Poppet O-ring secured on groove provides leak-tight seal.
• Unidirectional flow control of fluids
• Prevent loss of media caused by failed connections.

NGV Products – RCQ Series Receptacle Download Now

• DK-LOK® RCQ series receptacles fully comply with and are certified to the ANSI/AGA/CGA/NGV1 and ECE R110 standards for Compressed Natural Gas Vehicles (NGV) fueling connection devices.
• DK-LOK® RCQ series receptacle is designed for permanent mounting on a compressed natural gas vehicle (NGV).
• DK-LOK® RCQA receptacle utilizes the NGV 1 profile which allows complete interchangeability to any fueling nozzles conforming to the NGV 1 standard.

DQH Series High Flow Quick Coupler Download Now

• Standard SS316 and Carbon Steel construction
• Standard Buna-N seal O-ring.
• Body and Stem Ball-locking for positive connection.
• Standard Double Valve (DV) on body and stem.
• Interchangeable with other manufacturer’s coupler.

DK-LOK® Ultra-Torr Vacuum Fittings Download Now

• Union
• Reducing Union
• Union Elbow
• Union Tee

DQVP and GJ Series Quick Connects Download Now

• Maximum Working Pressure: 508 psig@100℉(35 bar@38℃)
• Minimum Burst Pressure: 2,030 psig@100℉(140 bar@38℃)
• Cracking Pressure: 87 psig@100℉(6 bar@38℃)
• Body and connector are made of Stainless Steel 316L

Metal Flexible Hoses Download Now

• High-Pressure – MFH Series
  • High Pressure Application Up to 3600 psig with 316 Stainless Steel Construction
  • High Temperature Application up to 850°F (454°C)
  • Wide Choices of End Connections of DK-LOK® Tube Port, DK-LOK® Tube Stub Adapter, Swivel 37 degree Female, Male and Female NPT/ISO Tapered thread
  • Products Type Approved by DNV : Certificate No. P-12877
• Medium-Pressure – FH Series
  • Designed for general purpose including positive pressure and vacuum service
  • Stainless steel construction of core bellows tube, wire braid, and end connection
  • Single braid layer for pressure containment
  • Custom length available
• PFH Series PTFE Flexible Metal Hose
  • High pressure application up to 3,000 psig (206 bar)
  • PTFE hose material has improve permeation resistant
  • Applied with stainless steel 304 wire braid, its improve the internal pressure and protect the wear
  • Variable end connection available

DK-LOK® Hydraulic Pipe Fittings  Download Now

DK-LOK® Hydraulic Pipe Fittings are designed and manufactured to the following standards.

• ASME B 16.11-2005: Forged fittings, Socket-welding and Threaded.
• ASME B 16.14-1991: Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads.
• JIS B 2316-1991: Steel socket-welding pipe Fittings.

DK-LOK® V43 Series Gate Valve Download Now

• Pressure up to 3600 psig (248 bar)
• Temperature up to -65°F (-53°C) ~ 449°F (232°C) with Standard PTFE Packing
• End connection : Screwed End 1/4 ~ 1” , DK-Lok Tube Fitting 1/8 ~ 1”
• Straight through flow path for providing a minimum pressure drop and maximum flow
• Valve stem back seating against the bevelled edge of bonnet in fully open position prevents maximum leakage through bonnet when packing fails

DK-LOK® Hose Adapter Fittings Download Now

• Standard hose barb design is for use with hose sleeve or hose clamp.
• DK-LOK® hose adapter fittings are reusable.
• Stainless steel and brass construction.